Chemical Engineering @ChemengFiles.Com

At present a recurring problem is the care of water, scarcity of this element has caused serious problems throughout our country and it is extremely important especially in summer, knowing that water treatment can be done to care for and seize it. When water conditioning, food processing prior to a boiler, you can have 2 basic methods and fundamental one hand there is the external treatment and the other domestic water treatment.

Through either of these methods what is sought is to prevent corrosion and fouling tendency own water, develop and deteriorate the quality of it. The external water treatment is carried out based on a series of more specific methods such as cold carbonate Cal, Cal carbonate hot calcium chloride or sulphate and lime in cold and Coagulation among others.

This type of approach is conducted outside separately, or by a combination of more specific methods, so that complement a process to achieve the proper water treatment and care.

The external water treatment is used in plants where the amounts of water are higher and some methods becomes feasible and profitable at the same time to achieve the objectives. Furthermore you can find the so-called internal water treatment, within which you can find various chemicals to treat boiler.

These methods of internal treatment does not work with large amounts of water, but rather limited and where the water chemical process takes place in the same unit.

In most cases these procedures are performed in private settings such as hotels, public baths and all that area that does not involve a lot of water very abundant. The type of chemical that is used in the process, is one of the parameters by which to govern the behavior of a boiler in the various processes to maintain and treat water.

With the same parameter can be measured Residual process, for example, here the chemicals used are phosphoric body which are not, nor act as pollutants and toxic elements and allow a more noble and optimal.

In this way and through a balance between total dissolved solids, residual treatment and pH, are able to avoid such attacks corrosive, caustic embrittlement and scaling.