The cooling towers are aiming to lower the temperature of the hot water comes from a cooling circuit through the heat and mass transfer to the air that circulates inside the tower. To improve the air-water contact, using a fabric called "stuffed." Water enters the tower at the top and spread evenly over the filling using sprayers. Thereby achieving a good contact between water and atmospheric air.
The filler serves to increase the time and area of exchange between water and air. Once the contact between water and air, a constant heat transfer from water to air. This occurs because of two mechanisms: convection heat transfer and the transfer of water vapor from the air, thereby cooling the water due to evaporation.
The cooling towers are aiming to lower the temperature of the hot water comes from a cooling circuit through the heat and mass transfer to the air that circulates inside the tower. To improve the air-water contact, using a fabric called "stuffed." Water enters the tower at the top and spread evenly over the filling using sprayers. Thereby achieving a good contact between water and atmospheric air.
The filler serves to increase the time and area of exchange between water and air. Once the contact between water and air, a constant heat transfer from water to air. This occurs because of two mechanisms: convection heat transfer and the transfer of water vapor from the air, thereby cooling the water due to evaporation.